Water Filter Housing Clear by Pentek

2.5 inch x 10 inch for use as under sink or  whole house water filter.

3/4 Female Pipe inlet and outlet

Features:

• NSF Certified and FDA Approved Material
• Pressure rated up to 20 to 125 psi
• Pressure Relief Valve for easy filter changes
• High Flow rate up to 8GPM
• Uses standard 2.5 x 9.75 inch filters
• Temperature Rated from 40-120 degrees F
• accepts both sediment and carbon block filters
• High quality polypropelene construction

Actual Housing dimensions 5 x 12 inches.

bracket, wrench and water filters sold seperately

Water filter Housing Bracket with screws for mounting your filter housing to wall or joist. Always use a bracket to eliminate unnecessary weight on your water pipes and torque when replacing your water filters.  For use with standard size filter housings, both 10 inch and 20 inch. Don't forget to order a filter wrench to change your filters. 

Big Blue Sediment Filter

Available in the following Micron Ratings & Model Numbers:

DGD2501-10 BB 25/1 (has 25 micron pre-filter & 1 micron post-filter)
DGD5010-10 BB 50/5 (has 50 micron pre-filter & 10 micron post-filter)
DGD7525-10 BB 75/25 (has 75 micron pre-filter & 25 micron post-filter)

This is the soft polypropylene filter not the hard glued imported type.

Quantity Discounts

Manufactured from 100% Pure Polypropylene
Designed for Purity and chemical compatibility
Two separate gradient density layers enhance filter cartridge performance
DGD Series Cartridges are designed for purity and will not impart taste, odor or color to the liquid being filtered. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.

Dual Gradient Polypropelene Sediment Filter

Available in the following Micron Ratings & Model Numbers:
DGD2501-20 BB 25/1 (has 25 micron pre-filter & 1 micron post-filter)
DGD5010-20 BB 50/5 (has 50 micron pre-filter & 10 micron post-filter)
DGD7525-20 BB 75/25 (has 75 micron pre-filter & 25 micron post-filter)

These are the soft best quality polypropylene filters not the glued hard imported type. 
Quantity Discounts

For high sediment municipal water use this sediment filter cartridge. ECP5-20BB cartridges are manufactured from a special formulation of resin-impregnated cellulose and polyester fibers.

This unique blend of materials provides a higher wet strength than regular cellulose cartridges. It also provides high flow rates and dirtholding capacity, while maintaining extremely low pressure drop.

The media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unified end cap and gasket.

ECP Series cartridge end caps feature a color-coding system for easy identification of micron ratings: Tan (1-micron), White (5-micron), Blue (20-micron), Yellow (50- micron).

Pentek PBH-420 Bag Filter Housing

A bag filter is the most cost effective way to filter high sediment water.  Available in 1 inch & 1 /2 inch NPT inlet outlet.   Pentek standard bag vessel housing keeps your system operating smoothly and longer by reducing bag filter change time.  The single layer thread closure ensures quick opening and positive sealing.

Comes with guage, wrench and 3/8 inch drain valve.  Made of high strength corrosion resistant polypropylene .  Maximum Tempurature 100 degrees F. Maximum Pressure 90 PSI.

Flow rate 1 inch 15 GPM  1 1/2 inch 20 GPM